What are the advantages of paint removal using a heat gun compared to infrared heat?
The first question is of course – will both tools help you remove paint? Yes, but there are many reasons why it is both safer and more effective to use Speedheater’s IR system. Here are a few examples of why we recommend Speedheater over a heat gun.
Precision is an important factor. The specific infrared wavelengths used in the Speedheater™ only heat what is directly in front of the heat source and not the surrounding area. Heat guns blow super hot air unevenly over a wider area, which increases the risk of fire and reduces efficiency. The heat gun also has to be in constant motion, making it difficult to control where and how long the paint is heated.
Another aspect is temperature. The Speedheater™ only needs to heat the paint to 110–160 °C / 400–600 ℉ to separate the bottom layer of paint from the wood. Heat guns need to heat the paint from the top down to 400 °C / 1000 ℉ to make the surface ready for scraping.
The risk of fire is also significantly lower with Speedheater™. The infrared rays only create heat in the upper part of the wood and in the paint, therefore minimizing the risk of fire. The hot air from the heat gun goes between and under boards and into cracks where dust and debris can easily ignite. The high heat penetrates the back of the wood and into the material behind the wood. Undetected from the surface, these can catch fire later after the scraping is complete.
In terms of knowledge, the Speedheater™ is easier to use. It requires less prior knowledge to safely monitor the heat. With the Speedheater™, you can quickly remove all layers of paint down to the bare wood in just a few strokes. With heat guns, reheating is often required and additional scraping is often necessary to remove the paint. Without the right tools and experience, there is a high risk of damaging the wood.
Kategori
Speedheater IR-teknik
Varmluftspistol
How does the method work?
IR lamp emits infrared heat radiation.
Heater blows hot air.
Power consumption
The method requires low energy consumption. 75% less energy consumption compared to a heat gun.
The method requires high energy consumption.
Temperature
Only 110-160 degrees to effectively remove paint.
Requires about 400 degrees to effectively remove paint.
Impact on the environment
Completely silent, no vibrations. No sparks. Only heats the area directly in front of the tool.
High whining noise level and vibrations. Creates sparks. Spreads heat throughout the room.
Fire hazard
Very little fire risk as less heat is required to work effectively. Only heats the surface directly in front and does not penetrate into cracks and crevices.
High fire risk as heat blows into cracks and reaches the surface behind the paint where dust and dirt can start to glow. The material can start to glow and ignite long after use.
Environmental impact
Does not release harmful amounts of toxins from the paint and does not pose a risk to the user's health. Does not require chemicals.
Releases encapsulated toxins in the paint and can be harmful to the user. Does not require chemicals.
Risk of personal injury
Low heat on surfaces and tools means low risk of burns. Does not release harmful amounts of toxins.
High heat on surfaces and tools also means a high risk of burns. Toxic fumes are released during use.
Risk of material damage
Low heat and spark-free technology provides low risk of fire and burns on surfaces. Low risk of glass cracking when heated.
High heat and sparking create a high risk of fire and burns on surfaces. High risk of glass cracking when heated.
User-friendliness
Ergonomically designed to minimize personal injury and simplify usability. Easy to handle, even for beginners.
More difficult to use from an ergonomic perspective and requires some technique for an efficient workflow.
Cost
Short term: Relatively high purchase price. Long term: Long lifespan and low energy consumption provide good economics in the long term.
Short term: Relatively low purchase price Long term: Short lifespan, consumes more energy and risks being expensive in the long term.
Resale value
High resale value.
Low resale value.
Time required
Covers large areas, heats up quickly and is typically 2 to 4 times faster than a heat gun. No pre- or post-work required.
Heats small areas at a time, heating may take longer depending on machine choice. Time-consuming heating method.
Life
High quality and long-lasting products. Always offers compensation and support for any factory defects as well as service and repairs at very reasonable prices.
Varies depending on manufacturer, however there is a high risk of a short-lived product with poorer repair and service options.
Maintenance
A Speedheater can almost always be repaired if damage occurs. IR tubes and other consumable parts may need to be replaced over time and with high usage, spare parts are always offered at a reasonable price.
Varies depending on brand and quality. In many cases, parts of the product cannot be replaced and the product cannot be repaired. This results in the user often having to invest in a new product.
Flexibility
High flexibility. Many areas of use, suitable for small and large projects and on different types of substrates.
Large selection to choose from but usually requires more customized products depending on the scope of the project.
Did you know that you can buy and rent Speedheater from retailers throughout Sweden?
Several of our dealers offer both purchase and rental of our IR technology. Find your nearest dealer here.
Why should I choose Speedheater if I am a professional?
Our products give you a non-toxic working environment, maintain high quality and are ergonomically designed to make your work both fast and smooth! Our products have a long lifespan and a very low energy consumption which provides good economy even in the long term. We develop flexible machines that work on many different types of projects, large and small and the safety for both you and the surface is very high. Take care of yourself and your environment!
Why should I choose Speedheater if I am a home carpenter?
Our products are incredibly easy and safe to use, even for beginners. We have developed our products to provide a safe working environment where no harmful amounts of toxins are released during use, which is especially important in a home environment and in families with children, for example. With our products, you minimize the risks of burning yourself and the substrate and flexibility mean that you can use our products on most of your renovation projects such as exteriors, windows and furniture.
When is it best to choose Speedheater over a heat gun? Whether you are a beginner or a professional, Speedheater IR systems are safer, faster and more user-friendly than, for example, heat guns. Speedheater stands out for its high quality, speed, flexibility and safety. It is non-toxic, ergonomically designed, has low energy consumption, long durability and good repair options.
When is it best to choose a heat gun over a Speedheater? In the short term, the price is the biggest advantage of heat guns. The range is large and there are many models to choose from that are cheaper than a Speedheater. In the long term, however, a heat gun is not an economically advantageous choice, as it consumes more energy and is difficult to renovate and repair. They are therefore cheaper and are available in a large range, but have their limitations in the long term.
Want to try a Speedheater but aren't quite ready to invest yet? Contact your nearest retailer and rent a Speedheater instead!
